Type = Sealless         Configuration = Horizontal
FLOW RATE = 450 LPM (119 GPM) (27 M3 / Hr.)
MAX. OPERATING TEMPERATURE = 79°C (175°F)
MAX. WORKING PRESSURE = 6 BAR (87 PSIG)
MAX. HEAD = 21 METERS (68.8 FT.)
MAX. Viscosity = 150 Centipoise (1.5 Poise)   MAX. Specific Gravity = 1.8

  • Port Size – ANSI / DIN Flange

    • Liquid Inlet / Suction Side – 2" (51mm)

    • Liquid Outlet / Discharge Side  - 1½" (38mm)

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  • Wetted Path : Volute & Casing

    • Glass Fiber Reinforced Polypropylene (GFRPP)

    • Poly Vinyl Di Fluoride (PVDF)

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  • Bearing Kit : Bearing / Shaft / Thrust Rings

    • Carbon (Please refer Bearing Kit Options)

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  • Impeller Type : (G2.5 Balanced)

    • Closed-ended Impeller (MOC – GFRPP)

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  • O-rings :

    • Viton (Please refer O-ring Options)

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  • Fasteners :

    • Stainless Steel – 304

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  • Motor Ratings : (Please refer Motor Options)

    • 2HP (1.5kW)

    • 2900RPM @ 50Hz.                            Efficiency =

    • Three Phase – 415 Volt                     Ampere =  

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  • Rated Point :

    • 200 lpm (52 gpm) @ 2.0 Bar (29 psig)

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  • Maximum Particle Size :

    • Slurries - 100µ (Microns)

    • In-frequent Particles – 0.4mm

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

 

Magnetic Capsule :

Inner Drive Magnet 
Neodymium Iron Boron Magnets Encapsulated in Unfilled Polypropylene (NdFeB)

Outer Drive Magnet 
Nickel-Plated Neodymium Iron Boron Magnets / Steel

 

Note :

Pump incorporated with Teflon Gasket has Max. Working Pressure of 3.5 BAR (50 psig)

 

 

Size

50Hz.

Impeller Dia.

60Hz.

Impeller Dia.
1
5.25” (133mm)
-
2
5.00” (127mm)
-
3
4.75” (121mm)
-
4
4.50” (114mm)
-
5
4.25” (108mm)
-
6
4” (102mm)
-
7
-
4.63” (118mm)
8
-
4.38” (111mm)
9
-
4.13” (105mm)
10
-
3.88” (99mm)
11
-
3.63” (92mm)

 

NOTE :
Select Impeller from Performance Curve

NOTE :
Standard orders are shipped with impellers that have not been trimmed and are at maximum size.

NOTE :
All impeller diameters shown in “mm” size & are variable in one (1) millimeter increments.

NOTE :
Orders for units with trimmed impeller will be changed out at the factory before shipment.

 

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

 |

EOM

NMP2H EOM

 

BROCHURE

NMP2H Brochure

 

FLYERS

Neo-Mag Design

 

SPARES LIST

NMP2H Spares List

 

 

  • Maximum Hardness :

    • 80 HS

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  • Maximum Concentration :

    • 10% by Weight

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  • Ship Weight:

    • GFRPP ……………. 40Kgs. (88 lbs.)

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

  • Pump Dimensions:

    • Length 550mm X Breath 305mm X height 280mm

 

 

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - NMP2H Performance Graph (2900RPM) - - - - - - - - - - - - - - - - -

Note:  Gravity-feed, Requires the Pump Inlet to be lower than Liquid Level

 

Centrifugal Pump Impeller Rule of Thumb !!!

  • Bigger the Impeller Diameter, Higher the Motor HP Consumption
  • Bigger the Impeller Diameter, Higher the Output
  • Bigger the Impeller Diameter, Higher the Discharge Pressure / Head

 

Flow indicates in chart are determined by pumping water at sea level. Based on Specific Gravity of 1.0, ambient temperature 20°C (68°F).

For optimum life and performance, pumps should be specified so that daily operation parameters will fall in the center of the pump performance curve.